Thread: Holley Bleeding After Shut-Down
-
02-28-2005 11:12 PM #1
Holley Bleeding After Shut-Down
Got my dual Holley 390's (4160) up and running on my little 302, stock fuel pump. Not leaking when the car is running, but a few moments after I shut her down, gas dribbles out of the DS of the front carb at the fuel line tube. The carbs were fully rebuilt less than a month ago, including the fuel line tube O-ring seals. I believe the seals are good, because it doesn't seem to leak when it's running.
I checked the float levels; everything looks kosher. Is this just backpressure? If so, how do I alleviate this?
Dual Quad Tunnel Rammed "Are you INSANE?" 5.0L H.O. '78 Mustang II
http://www.cardomain.com/ride/803178
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
I've had a lot of BIG things happening to me lately but now I'm back to working on the car some, it feels good! The tranny mount was bad and that helped put everything back where it should be....
SB distributor won't fit