Thread: engine timing
Results 1 to 11 of 11
Threaded View
-
11-22-2004 05:54 PM #5
Originally posted by Henry Rifle
Couple more degrees initial, and I'll bet you could get that motor to run backwards.
Seriously, nosing over early indicates accelerator pump in the carb to me.
Have you checked your timing mark against #1 TDC to make sure the balancer is indexed properly. I agree with lt1. Something sounds odd here.
Also, do you have vacuum advance? If so, did you set the timing with the vacuum line disconnected and plugged?Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40