Results 1 to 11 of 11
LinkBack URL
About LinkBacksThreaded View
-
10-16-2004 01:50 PM #9
CHR Member/Contributor
- Join Date
- Jun 2004
- Location
- Auckland
- Car Year, Make, Model: 69 Holden HT
- Posts
- 818
I would get onto it quick, or soon its going to go bang ?Originally posted by Monte Man
but won't it still tap because the crank is still rotating? evevn though that cylinder is not firing?
Oh yeah I forgot whats your oil pressure like ? If you dont have aguage in the car, just fit one of those dirrect reading mechanics oil pressure guages where the electric oil sender is. I would go with pulling the plug wires on those cylinders untill the knock dissapears and checking your oil pressure as confirmation. Your oil pressure should read 50 to 60 PSI with astock bottom end. And if/when you pull the motor down replace the oil pump. hope this helps some. SLast edited by southerner; 10-16-2004 at 01:57 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I've been checking in and figured the site had died forever. I checked today and bam it's back on. Awesome. I don't contribute much here, I just come to read and enjoy hotrod builds and good company...
Back online