Thread: Engine knock
-
08-12-2004 06:57 AM #1
Engine knock
A buddy just had his engine rebuilt by a reputable engine builder. It's a 327 sbc, new cam, align bored, new bearings etc. The noise sounds like it is coming from behind the thermostat housing. He pulled the intake off and replaced the front 4 lifters and the noise persists. The knock starts at about 2000 rpm. He pulled one plug at a time and the knock is still there. Any thoughts???Stand on it!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-19-2004 01:25 PM #2
Spun rod bearing!!!Stand on it!
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project