Originally posted by woodhook13
I have recently overhauled a 400 Pontiac After setting the engine back in I had a "miss in the number 4 and 6 cylinder. I decided to touqe the rockers while the engine was running. The left side went well. When I started on the right side, I noticed no oil coming out of the push rods. I have good oil pressure on the gauge and the left side was oiling good. Any suggestions?
Did you take the oil galley plugs out before you cleaned the block? Blow air through ALL the passageways after the block was boiled? Could be sludge or debris plugging the galley? Just a thought.