Thread: SBC Running HOT
Threaded View
-
04-28-2004 08:06 PM #1
SBC Running HOT
Hey guys. I have a question.
I have a SBC 350. It is the HO engine GM offered a couple of years ago (non-vortec heads). It is installed in my '67 Camaro and was the result of an engine swap from a 230 inline 6.
The engine runs hot when the temp is above 75 and I am sitting at idle. Once I get going again, the temp come down again and things are OK.
I have a brand new four core radiator, fixed fan w/appropriate shrowd for a SBC camaro.
I am running a little less than 50/50 mix on antifreeze/water...bias towards the water.
This is not a wild engine and I thought I addressed all of the basics. Any suggestions? This is getting really frustrating.
Building a 1937 Caddy with a LS 2 engine. Looking at the exhaust system and wondering if I really need to put an X or H pipe in the system or can I just go straight dual exhaust. Will performance be...
Exhsust system