Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree15Likes
  • 1 Post By rspears
  • 3 Post By techinspector1
  • 1 Post By firebird77clone
  • 1 Post By 53 Chevy5
  • 3 Post By 34_40
  • 3 Post By glennsexton
  • 1 Post By techinspector1
  • 2 Post By crazydad42

Thread: Heads Port and Polish, Cam, etc
          
   
   

Results 1 to 12 of 12

Threaded View

  1. 09-08-2019 04:09 PM #1
    crazydad42
    crazydad42 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Sep 2019
    Location
    Fayetteville
    Posts
    6

    Heads Port and Polish, Cam, etc

     



    I've got RHS Pro Action 64cc, 200cc heads on a forged 383 with a comp nitrous cam -CL08-301-8. Looking for a little more HP. Ideas on how much HP I'll gain from a port and polish and port match? Running a Perform RPM manifold. I know I've got room to move on the cam. Looking hard at the Comp XR294-HR. Any experience and comments on that cam would be appreciated. 700R4 with 2,800-3,200 stall.

    Cam currenty installed- Part number CL08-301-8 NX276 HR 224/236 at .050, .502/.52, 113 separation

    Cam I'm looking at- XR294HR, Part number 08-443-8, 242/248 at .050, .54/.562, 110 separation

    Thanks all!
    Last edited by crazydad42; 09-13-2019 at 07:00 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink