12Likes
Thread: 258 breather/pvc blow by problem
Results 1 to 15 of 15
Threaded View
-
03-01-2015 07:35 AM #10
IMO, the easiest is to drive into a bay of your local spray it yourself car wash, put a plastic bag over the distributor and duct tape it, and let high pressure hot soapy water do the trick, but in some places you may want to do it later in the night, when they don't have an operator there. Lots of them have a "degreaser" setting (which tells you they have a grease trap on their drain), but spraying it down with Simple Green, Purple Power or something like that, and letting it soak for five or ten minutes works, too. You can do much the same thing with a pressure washer in your driveway, but it's cold water and you'll have all of the greasy mess to deal with.Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.





LinkBack URL
About LinkBacks
Reply With Quote
39 views and no answers, a real active crowd.
Where is everybody?