Hey guys so I have a stock vortec 350, that I would like some input on. I'm using stock internals, i bought a rpm air gap intake, a comp cams hydraulic flat tappet cam set with .490 valve lift on intake an exhaust, duration is 274 intake an 286 exhaust, and 230 intake an 236 exhaust at .050, with lobe separation at 110. I bought 1.6 ratio roller rockers, .800 pushrods, 2300 stall converter, an a holley 750 vacuum secondary. Any input Wether this is going to work well or if there is something I should change would be very appreciated