Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree22Likes

Thread: Exhaust leak on manifold
          
   
   

Results 1 to 15 of 34

Threaded View

  1. 09-11-2014 07:28 PM #5
    MelloYello's Avatar
    MelloYello
    MelloYello is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Mar 2010
    Location
    Montgomery
    Car Year, Make, Model: 1962 Ford Fairlane 2dr with 289
    Posts
    9,934

    I have had some success in "honing/milling/flattening" metal surfaces using the procedure in this video below. I know that it's not an exhaust manifold but I think you can see the principle that I am talking about. It's basically just gluing the proper grit abrasive to a flat board and using it across "all" surfaces. The hardest part will be keeping the manifold in place while you do this. Good Luck
    https://www.youtube.com/watch?v=HyKN52HD6RU
    Last edited by MelloYello; 09-11-2014 at 07:32 PM.
    Dave Severson likes this.
    .
    " I'm drinking from my saucer, 'cause my cup is overflowed ! "
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink