Anyone able to tell me the manufacturer of these from the pics? Thanks in advance
Printable View
Anyone able to tell me the manufacturer of these from the pics? Thanks in advance
From the profile and bolt placement, it looks like from 70-80s era, possibly Carrillo
They are for sale in my area and I need rods for my build. Guy want $150 for them. Only a 350-375 hp build
If they've been magnafluxed for defects, I would rip the stitching out of my rear pocket getting to my wallet as quickly as possible.Quote:
Originally Posted by H.O.Rider
.
looks like a china A beam could be a wheeler. i would say the parting lines on the cap look like a carrillo pro rod but would come with 3/8 wmc bolts ??????
They have not been magnafluxed. Came out of a running 327 engine. Worthy of $150 or should I just buy some new Scat I Beams....
I searched the net for the "H" on the rod bolt but came up empty..
Looks like they been resized---need to check all of them carefully for any signs of high temp(blueing) and size both big and small end-----
new rods or just not much time on them as you can see cross hatch on the side s of the rods as well as there is runing clearance on them they still get some wear marks. i do not think they were used much .just looking at the bolts and i still think them rod bolt say china all over them . still think it a A beam or some ones lite weight H beam rods. has all the H beams i ever used they never had the bottom cap part of the rod cut back that much . the way the rod is side cut around the wrist pin i can tell you whos it is notQuote:
Originally Posted by jerry clayton