Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Starter pinion not close enough to the flywheel
          
   
   

Reply To Thread
Results 1 to 12 of 12
  1. #1
    calxen61 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2013
    Location
    cheney
    Posts
    11

    Starter pinion not close enough to the flywheel

     



    I have a recently purchased 69 corvette convertible, solid driver. It has a 383 NOM. It appears it is from a 70 - 75 Chevy, maybe newer. The new HI Torque starter I just purchased is supposed to be .1 to .140 inches away from flywheel at rest, (not the mesh gap distance). It is about .350. One other stock motor appears also to be about that far. The starter I removed was father than that and made a loud noise when I first stated it. Clearly too far away.

    Is there a 350 that requires a longer starter nose to get closer to the flywheel.
    Any ideas.

    thanks
    cal

    cal

  2. #2
    t-top havoc is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2012
    Location
    Streator,
    Car Year, Make, Model: 87 Camaro
    Posts
    345

    Automatic or 4/5 speed?
    Do you know the tooth count/size of the flywheel/flexplate?

    There are 2 sizes for automatics-- 153 & 168 tooth starters. I dont know if this is true for 4/5 speed trans.
    Try to research starters. There are a few that advertise they work with either a 153 or 168
    flexplate ring gear. I dont know if this is true with 4/5 speeds.
    Anyone add to this?

    ( edit )
    Does the starter mount boss have 3 holes? 2 straight across from each other & 1 kinda at an angle?
    Last edited by t-top havoc; 10-08-2013 at 10:28 PM. Reason: add lil info

  3. #3
    calxen61 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2013
    Location
    cheney
    Posts
    11

    It is a 4 speed. 168 tooth flywheel. The starter has the correct part number for a 69 corvette. The pinion will mesh correctly it is just not close enough to the flywheel. It engages only 25 to 33 percent of the pinion. I have heard there is a longer nosed starter but cant find a part number. I cant believe the flywheel is set to far in.

    thanks

    cal

  4. #4
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    GM indeed used two different starter snouts starting in the '70's. You can read about it on the Crankshaft Coalition - http://www.crankshaftcoalition.com/w...#Starter_noses but I think what you need is the starter with the staggered mounting holes (for a 168 tooth flywheel) as opposed to the one that's straight across (for a 153 tooth flywheel). I saw one note saying that they had luck asking for a 1972 truck starter, but can't say for sure. I'd go to NAPA and have them pull both of the GM starters that they list across the late '60's thru the '70's, with yours in hand for comparison.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  5. #5
    calxen61 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2013
    Location
    cheney
    Posts
    11

    I have a mini starter that uses both sets of holes. I have it set for 168. At rest the pinion is still .360 away from the pressure plate. Will not engage completely Can the plate be located to far forward. The motor runs great.

    thanks
    cal

  6. #6
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I take it that its an aftermarket starter???????????????why not use a chevy one on it??????????

  7. #7
    calxen61 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2013
    Location
    cheney
    Posts
    11

    Going to try one today, however I have the original starter (rebuilt) from my other 69 and it also sets too far back. I wanted to try a hi torque starter on this 383.

    cal

  8. #8
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    Cal,
    If you look at the Wiki information, the cast iron snout is different in length from the cast aluminum snout on the OEM. My initial thought is that while your starter will bolt to either the in-line or staggered block pattern, the position of the bendix is wrong. I'd be calling Summit to talk to them about the different starters they sell, and which one works for you. The problem is you don't really know what year your engine was built or the model application, so you have to go by dimensions and that's a lot harder in today's computer driven parts listings.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  9. #9
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Can you tell if its a stock flywheel and if the ring gear is on it correctly?? not crooked/run out or too far back?????????

  10. #10
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    I been out in the shop looking at crankshafts, blocks, flywheels,etc-many possibilities-----I didn't measure anything but with the possibility of one piece/2 piece rear seal cranks, 153/168 flywheels, and all the different years of blocks--I'd bet that you have an aftermarket starter component that is either wrong application or defectice in some way/fit-

  11. #11
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    If you can measure the distance from the back edge of your block to the ring gear I will install a flywheel on an engine in progress and measure to see if they match-----------

  12. #12
    calxen61 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2013
    Location
    cheney
    Posts
    11

    168 flywheel, manual. The starter was for a 69 corvette 350. I have now tried a 72 stock starter and it has enough throw to reach The flywheel. The hi torque mini starter will not. I have also been told a big block starter will bolt up and has a longer throw.

    I am checking. Still do not understand why there is a difference in flywheel gap.
    I can measure from the back of the bell housing to where the flywheel starts will that help.

    thanks
    cal

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink