Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: engine that takes leaded gas
          
   
   

Reply To Thread
Results 1 to 7 of 7
  1. #1
    36chevymaster's Avatar
    36chevymaster is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2008
    Location
    perry hall
    Car Year, Make, Model: 36 chevy master sdn
    Posts
    16

    engine that takes leaded gas

     



    a friend that just bought a 68 amx. the engine in it still take leaded gas.
    what needs to be done for it to take unleaded gas.

    thanks for any and all help

  2. #2
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    The valve seats can be changed to more hardened ones. I just had a discussion with a machinist on having this done to a set of 66 Olds heads and he says to put the hardened seats on only the exhaust valves. His comment was that without the lead in the gas the valve pounds the seat when closing and will recess it over time.

    I was surprised to hear that only the exhaust valves need it, but maybe some of our engine builder types on here can expound on this more. Conversely, the first machinist I contacted said hardened seats are only needed if you intend on driving the car a lot, as in being a daily driver. The second machinist scoffed at that.

    Also, there are lead subsitutes you can dump in your gas to replace what is no longer there at the pump, but that would get old and expensive I would think.

    Don

  3. #3
    TooMany2count's Avatar
    TooMany2count is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Cahokia
    Car Year, Make, Model: 48 Chevy 1ton Bus
    Posts
    2,486

    Hey Don, I have always read that the Olds and AMC mtrs has a high nickle content & don't need harden valve seats.....joe
    Donate Blood,Plasma,Platelets & sign your DONORS CARD & SAVE a LIFE

    Two possibilities exist:
    Either we are alone in the Universe or we are not.
    Both are equally terrifying.
    Arthur C. Clarke

  4. #4
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    yep and seats can fall out crack and fail they can be put in were there cut to deep and weaken the head and you can cut in water with a head not made for a seat. weak valve springs beat in the ex side of the head as there more heat on the ex valve.BUT seats are cheap so cheap that i will not post what i pay for them in bulk theres good money to put in seats . if a older hard to find head i may not put seats in it has alot to do with how many miles its going to see . many heads are hard from the go if 1970 many were heat inducing the ex side of the stock head and there are very hard ..try cutting one out for a seat some time i have one other thing with seats they can hide a crack or repair thats ok if you know. that s not so good if your looking for cracks in the casting as a mag check will pass over whats hinding under a seat . the lead in fuel helped lube the Ex seats keeping the transfer of iron to valve face .most stock valves are a form of stainless steel this helps alot were the pulling of metal from the seat
    Last edited by pat mccarthy; 06-30-2011 at 09:36 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  5. #5
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,844

    Here's a cut and paste from something I posted on another board a couple days ago just cuz I don't want to type it all again;

    For some it might be useful to understand the mechanism of exhaust valve errosion infrequently experienced with unleaded fuel. Basically the valve face tries to weld to the seat face (at the microscopic level). Then the weld is torn by the valve opening. The notion of "lubrication" from the lead is somewhat of a misnomer from the normal way folks think of lubrication. Anyone who is familiar with welding knows it's difficult to weld dirty work pieces. That's pretty much what the lead did, it deposited on the exhaust valve area/components and prevented the welding by contamination. BTW, since the tetraethyl lead is in solution before combustion it does nothing for the intake valve. Using logic, the trigger for welding is heat. Vehicles that experience exhaust valve errosion usually are ones that work hard (i.e. not normal driving). Examples would be heavy duty equipment, racing applications, and so on where high heat is generated/retained. Another experience of welders is the difficulty of welding dissimilar metals, thus the stainless valve/induction hardened seat/ and so on.

    I'll second Pat's comment about the dangers of a "less experienced" shop cutting into the water jacket under the seat. I had that happen on a BBC a few years back, took a while to show up so went undetected for some time.
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

  6. #6
    Matt167's Avatar
    Matt167 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Prattsville
    Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
    Posts
    4,990

    Check with theamcforum, but I'm fairly certin that the V8's from AMC in those years were hardened seats from the factory. Even if they arn't, the limited use of a car like that, won't really hurt anything.. I do know they are high nickle content
    You don't know what you've got til it's gone

    Matt's 1951 Chevy Fleetline- Driver

    1967 Ford Falcon- Sold

    1930's styled hand built ratrod project

    1974 Volkswagen Super Beetle Wolfsburg Edition- sold

  7. #7
    TooMany2count's Avatar
    TooMany2count is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Cahokia
    Car Year, Make, Model: 48 Chevy 1ton Bus
    Posts
    2,486

    I was just asking & it good to learn something new.....joe
    Donate Blood,Plasma,Platelets & sign your DONORS CARD & SAVE a LIFE

    Two possibilities exist:
    Either we are alone in the Universe or we are not.
    Both are equally terrifying.
    Arthur C. Clarke

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink