Thread: 350 Winnie 20' 1981 motor home

Tweet

lets chop it no need for welding just wood screws .some time ago i help some guy put a 455 in a MH did it at my shop pulled the403 engine out the front window i think a GMC look like a beer can on its side . he did use a holley pro jection mpg was about the same but more power to pass could of been better but i know it was not less

10 Grand is almost a deposit for a newer M/H the size I don't want.........

As it stands now the use of it is more important than the resale value.

I almost can't believe I just said that given my history of buying and selling race cars.

But with this,it is what it is.I have had this project on the back burner for awhile.Me not following threw is not a option.

Got tied up in another priority,but I am now back to this game plan.I asked to Pat,Jerry,Dave and then Richard mainly because with me they do know how to build the torque/hp side of this project.I have always respected the guys that knew how to build into a engine with obstacles efficiencies(the wind resistance/wt in this case) that gave great mpg too and was able to predict how that end result would be.

Not to repeat myself-but with the current set-up I get from 8 to 6 mpg.I am convinced that can and will be improved on.I am committed to this M/H.Even if it meant I had to weld like 5" pipe spacers on the body mounts to lift the body up for how long a 5.9 diesel engine/47 dodge tranny to help it fit.Before you laugh at that thought.I was done on a 1997 Safari van sub frame to help make room to swap a brand new crate 502 Ram-Jet engine,When it was done,it looked factory.You could say about that too,why??.Why put in a engine in a van like that??.One that isn't worth the costs of the van.One that was owned by a very good friend of mine that he spent about $30,000 on.Heck most of the rods here that same question could be applied.Why??.Right??.

Here is the ref thread on Peter's build is you have any doubts about the Safari build:

http://astrosafarivans.org/bb2/viewt...hp?f=71&t=1015

I am not in the mind frame to spend that kind of money on this.But I am also NOT a hack to haft ba.. a swap.I have never spent much time on rods asking myself why not.Most of the time I have spent asking my how to.I do think here I am surrounded by guys just like that and this thread is posted in the general engine section.

So guys I am hoping for that kind of support to help me get there.


I am just tell you all where my thinking is.That you are not dealing with a "poser".At 63 yrs old there has been a long list of rods(from a 1953 Chevy coupe Hemi to Henry J's to 55,57,Dodge Darts,1975 tube frame Monza,)and god knows how many race cars and well too many to list.At heart I am a die heart rodder taking a pc of coal turning it into a diamond in my eyes.

just for my own info---did you have a chip or any mods on the Ford???if so, what??

Jerry,honestly,that was what,maybe 6yrs ago,so I don't recall,but do remember the fuel log.Been afew trucks/M/H's since.

We don't fall in love with anything there.It's a fatal flaw we have seen with guys on race cars and tow rigs marrying into something way beyond the resale value.Next good deal is always the push to the next rig.

This M/H is a venture of my own which I know is opposite of what we do.But it is my dime.........

OK, I just want to remind you that you specificately asked, Pat,Jerry,Dave

Originally Posted by jerry clayton

OK, I just want to remind you that you specificately asked, Pat,Jerry,Dave

I did.All for very good reasons.

Originally Posted by jerry clayton

OK, I just want to remind you that you specificately asked, Pat,Jerry,Dave

Hey that's a Big Truck Not a Race Car ?

tube frame Monza-----bet that would make a nice avator--see one anywhere?

Originally Posted by jerry clayton

tube frame Monza-----bet that would make a nice avator--see one anywhere?

That was yrs ago JERRY.No camera.But If I Knew Then That I Would Meet You To Have To Prove Ever Darn Thing I Say,I Would Have Taken Some Pixs.A Don Hardy Back Haft That Was Later Front Hafted.I Would Have Guess You Where Into A Peddle Car Back Then!!!.

I think it is setting in a guys garage with no engine.I built the frame and it has gone threw more cycles of wheel stands than most cars with no problems.

So could you(yea right)be a good guy and help out some??.


You going to the Dave&Ed show at Canton Ohio March 5th and 6th??I would be easy to pick out of a crowd.A old sort of fat sort of bald guy that if driving again has some more 4.0 lights left in him.See ya at the practice tree...........I am serving turkey for lunch.


Man,I amazed at the number of guys that say you can't do that.We have said OK and then it meant more for us.You can't buy/sell race cars when the market wasn't so soft.........OK..........OK more for us...............you can't use a oval track roller cam in a 9.90 car..........ok more money for us.......you can't keep changing cars like that.........ok more wins with money for us.You can't,you can't.......OK Jerry,Ok Jerry.............

Gary look at my avator---then look in my gallery

And I haven't told you once that you couldn't do something

Gary, Jerry doesn't need defending by me by any means, but he's been down the track a few times in his career. He's a very knowledgeable (and experienced) fabricator. He's been to my shop, looked at my junk and didn't put the project down once. Even though the "Z" is my first attempt at building a car like this and I'm just learning as I go. (Read that as Jerry could have picked it apart but didn't). Any suggestions he might make come from a pretty good background in the fabricating/racing business.


BTW: Jerry, you owe me 5 bux now........ J/K

Originally Posted by jerry clayton

Gary look at my avator---then look in my gallery

And I haven't told you once that you couldn't do something

Well Jerry,I'm sharing a pc of my humble pie.........now.

So I'll put that 4.0 thumb where ever you want me to.

Sorry guy,just one of a raging bad day........putting out fires so to speak everywhere.

whats a 4.0 thumb?

Originally Posted by jerry clayton

whats a 4.0 thumb?

MALT LIQUOR ?