Thread: porting an aluminum intake
Results 1 to 7 of 7
LinkBack URL
About LinkBacksThreaded View
-
08-14-2010 10:38 PM #5
CHR Member
- Join Date
- Nov 2004
- Location
- waldeck
- Car Year, Make, Model: 66 ford custom,27 t bucket
- Posts
- 683
thanks for the reply pat i started working out the intake to about 3/16ths on the top,the heads ports are actually so tall that without gaskets are past the top of the intake by a hair. the gasket brings it up just enough to seal plus i think a bead of silicone will be required on the top of the intake plus repositioning of the gasket.
I think the heads are waay to big for the intake the more i look at them.
Pat you might be able to answer my next post cause i am dealing with shaft roller rockers that dont match upLast edited by canadianal; 08-14-2010 at 10:42 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!