Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Too Tight
          
   
   

Results 1 to 14 of 14

Threaded View

  1. #7
    vara4's Avatar
    vara4 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2003
    Location
    Pahrump
    Car Year, Make, Model: 1947 International Pick Up
    Posts
    3,188

    I also would have to agree with a ground problem.
    I had the same problem with a motor and ran a new cable straite to the starter mounting bolt from the neg side of the battery.
    I had had the problem from the time the new motor was put in the truck by a previous owner who never could figure out the problem. Everything was clean and new and cranking would be at best slow when cold and would not crank when warm.
    Once a new cable was run straite to the starter mounting bolt it turned over like a high crank starter, no more problems since. Then if this does not work, start looking for bigger problems then in the motor.Kurt
    Last edited by vara4; 07-15-2010 at 11:39 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink