Build sheet on a clever 302

[vara4]

Anyone know where I can get a good build sheet on a clever 302, AKA Mexican style Boss 302.
Supliers for parts to if anyone has them.
Thanks Kurt

[Dave Severson]

We used the Cleveland 2V heads for street cars, 4V heads for a drag car. Some drilling and plugging has to be done to accomodate the cooling system, I've got them filed away (someplace!!) but I'm sure the blue print is still available on line. The new trick setup seems to be the Aussie heads!!! I'll try to dig up the information on them for you.

Kurt, are you aware that there is a brand new Boss 302 4 bolt block with all the mods done to the oiling system, etc. available from Ford???? Very nice piece, friend of mine got one a couple months back and it looks great!!!

[pat mccarthy]

i should have one at the shop in two weeks with the 4v heads with the hi port ex plates will see

[vara4]

Ya Dave; I herd they were comming back out with the Boss 302.
I made a mexican style Boss some years back but I don't remember everything we had to do. Head bolts with sleve's cleveland type pistons Yates intake.
I am thinking I used a 289 rod, though I bought a after market rod.
Something was differant about the bottom end, I just can not remember what it was.
It's been almost 30 years ago. Kurt

[shawnlee28]

Here is a little info for ya .....

http://www.darkhorseracing.net/clevor_head_mod.htm

Good luck and keep us posted ,I have all the parts other than a intake to do this also.

[HOSS429]

i`ll post a bogus boss i built a hunnert years ago when i find the post on another forum .. it` was a real hodgepodge motor ..