Thread: Help with a 454
Results 1 to 5 of 5
Threaded View
-
04-01-2010 07:00 AM #3
it sounds like you're 180° out of time.
pull #1 (yes, drivers side) spark plug and hold finger over hole. rotate the engine until pressure is pushing on your finger. then set balancer to 0... then set distributor to #1 position.
we've ALL done it no point in denying it...
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build