Thread: Header flange caps
Results 1 to 12 of 12
LinkBack URL
About LinkBacksThreaded View
-
02-12-2009 06:22 PM #8
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
Made my own. I wanted to incorporate baffles into each Limefire header so I cut a piece of flat steel into the proper shape, holesawed a 2 inch hole in the middle, welded in a 2 inch tube, and punched it full of holes. Brought the sound level down about 50 percent, I would say. I then painted the flange with silver hi temp exhaust paint and sandwiched the whole thing between the header and the turnout. You can't see it up in there at all.
Don
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I've been checking in and figured the site had died forever. I checked today and bam it's back on. Awesome. I don't contribute much here, I just come to read and enjoy hotrod builds and good company...
Back online