My tbi 350 truck motor has "the worst heads gm made" has any one tried or heard about putting old style heads/intake on a tbi motor i read on a web site you could do it with a transdapt gm tbi to holley pattern adapter and a custom chip. i have a set of unused but 10 year old heads i bought but never used from areohead with 76cc,2.02/1.60, bowl porting 3 angle valve job and screw in studs (.500 or .525 springs cant remember) and i have an old style torquer intake id like to put em on plus a better cam than the 1 i put in and was just wondering if anybody had some imput on this conversion,thanks