Thread: Sb Cam

Tweet

What is your top pick for a street hydraulic cam non roller . For a 350 SB 9.5CR . And if you used it how well did it work ? Car and E.T ?

Originally Posted by tango

What is your top pick for a street hydraulic cam non roller . For a 350 SB 9.5CR . And if you used it how well did it work ? Car and E.T ?

With what gear,what stall ??

3500lb car TH400 373 GEAR . Two that I like are the comp cams dual energy CS 275DEH-10 This one is 219/229 at 0.50dur and 462/482 lift . the other came is the Comp cams Xtreme energy CS XE268H-10 its 224/230 at 0.50 and 477/480 lift both run a 110 lobe separation . I do think I will run one of these . Has any one here ran one of these cams ?

Thanks lots of good info . I have a 406 SB that will go into the Monte Carlo later . But for now I just want to get the car back on the street so I can dial in the chassis . The heads on my 355 are full ported so I think the CS XE268H-10 224/230 477/480 will be the cam that I will run . COOL