Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
10-28-2007 05:13 PM #1
CHR Member
- Join Date
- Mar 2005
- Location
- spokane
- Car Year, Make, Model: 1971 chevrolet custom 10
- Posts
- 100
zz4
alright i have this 350 ZZ4 engine, and i have a 350 in a 72 chevy truck, i was wondering if i can throw a carberated intake on the zz4 if it would bolt up to the stock L31 heads, i was also wondering if my 186 camelhump heads would bolt up to the engine if the water holes are the same, also the zz4 has a roller cam setup in it and i have a high-perf cam in a n other engine but the cam is not a roller, can i use the roller lifters and the other cam or no.
-
10-28-2007 05:21 PM #2
CHR Member
- Join Date
- Apr 2004
- Location
- Little Elm
- Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
- Posts
- 3,890
If you have the ZZ4, why change the heads? The ZZ4 heads are better than either of the two you mention.
And NO, you cannot use roller lifters in a conventional cam.Jack
Gone to Texas
-
10-28-2007 05:40 PM #3
CHR Member
- Join Date
- Mar 2005
- Location
- spokane
- Car Year, Make, Model: 1971 chevrolet custom 10
- Posts
- 100
the L31 heads are what is on the ZZ4 engine
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy