Results 1 to 7 of 7
LinkBack URL
About LinkBacksHybrid View
-
09-01-2007 11:00 AM #1
CHR Member/Contributor
- Join Date
- Aug 2007
- Location
- simi valley
- Posts
- 9
The pistons came with the block after being bored and also the cam and lifters were in it.The reason for the crank from my old 429 is the crank that belonged in it was all chewed up on the key way end .Thanks for your response shawnlee28
-
09-01-2007 12:02 PM #2
CHR Member/Contributor
- Join Date
- Aug 2007
- Location
- simi valley
- Posts
- 9
Push Rod Length
Checked the pushrod length and it is 8.675 I believe paul said in one of his articles this is stock.Anyhow that is what I have.Thank you for your advice and help.BUD P.S were are you located in IL. I grew up in Spfld spent 16 years there.
-
09-01-2007 12:21 PM #3
CHR Member/Contributor
- Join Date
- Aug 2007
- Location
- simi valley
- Posts
- 9
pics
They are on my page with the post or should be I think if you click on the camera they will show up .Bud
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40