Chevy 350ci into Pontiac- HELP

Printable View

08-25-2007, 11:15 PM
MT79

Chevy 350ci into Pontiac- HELP

Hi guys,
I'm trying to put a Chevy 350ci in a 1979 Firebird originally a V8 301ci car. Does the Pontaic have different motor mounts on the frame and/or engine?

It looks like the chevy uses a diff. spot for the motor mounts on the car frame. The engine just will not drop in- it seems to far forward, even when the trans dipstick is on the firewall, relative to the engine mounts on the frame. I have the factory Firebird engine mounts on the frame and the factory Chevy mounts on the engine. Any help is VERY MUCH appreciated. I already rented the engine hoist....
08-26-2007, 05:50 AM
halftanked

If you use camaro frame mounts,then it will fall right in. Hank
08-26-2007, 06:15 AM
Dave Severson

1 Attachment(s)

Yup, helped a friend do the same swap on an '80 Bird. When you get into the wiring you'll find the battery and alternator are on the wrong side, too. The battery tray can be moved to the other side on the radiator support, the bolt holes are already there. On Bill's Bird I just extended the wiring harness for the alternator.
08-26-2007, 09:06 AM
MT79

Thanks!
Dave, that is a NICE looking car.
08-26-2007, 05:05 PM
Dave Severson

Quote:

Originally Posted by MT79

Thanks!
Dave, that is a NICE looking car.

Thanks, belongs to a friend of mine...OOps,,,it did--He sold it last week!!! Was a really rough car when we started, spent a lot of hours on the build but it was worth all the effort! Bill got lots of compliments on the car.
08-26-2007, 09:14 PM
MT79

Do you know the size of the front tires on that Firebird?