got my new valves, what do you use?

Printable View

05-23-2007, 06:00 PM
gassersrule_196

got my new valves, what do you use?

this may or may not be a taboo question but!? what brand valves do some of you guys run? i am using martin wells/ferrea valves
05-23-2007, 06:20 PM
Matt167

new SI valves in my '78 Ford 200 I6 head. 1.36 exh / 1.75 int. there just stock replacement.
05-23-2007, 07:41 PM
pat mccarthy

well you may want to ask how many get made at one or two places and get the rebox... i have used them all if i was doing the best were money was no big deal then ferrea or delwest... manley is not to bad
05-23-2007, 10:06 PM
gassersrule_196

Quote:

Originally Posted by pat mccarthy

well you may want to ask how many get made at one or two places and get the rebox... i have used them all if i was doing the best were money was no big deal then ferrea or delwest... manley is not to bad

OMG you know what ferrea valves are! only about 10 people in this town know what they are!:LOL:
05-23-2007, 10:22 PM
pat mccarthy

Quote:

Originally Posted by gassersrule_196

OMG you know what ferrea valves are! only about 10 people in this town know what they are!:LOL:

how many know of delwest **) i have a set of ferrrea valves in the gto:3dSMILE:
05-24-2007, 06:46 AM
HWORRELL

We are runnining the lightweight Ferrea stuff in the kids sprint car. Their lightweight lifters are pretty amazing as each lifter weighs less than a half empty pack of smokes :LOL:
05-24-2007, 08:11 AM
erik erikson

Quote:

Originally Posted by gassersrule_196

this may or may not be a taboo question but!? what brand valves do some of you guys run? i am using martin wells/ferrea valves

Which Ferrea valves?
They have about 5 different product lines.
The cheap ones I can buy all day for about $7.95.
05-24-2007, 05:10 PM
pat mccarthy

Quote:

Originally Posted by erik erikson

Which Ferrea valves?
They have about 5 different product lines.
The cheap ones I can buy all day for about $7.95.

what would you put them in:D have you used the pep or the pbm erik ??? how about the black meli ss valves i use a lot of the PBM SS valves seam to work good :D enquiring minds want to know :3dSMILE: :3dSMILE:
05-24-2007, 06:30 PM
gassersrule_196

maybe he doesnt have an answer THIS time? :eek: :LOL: j/k
05-24-2007, 06:42 PM
erik erikson

Quote:

Originally Posted by pat mccarthy

what would you put them in:D have you used the pep or the pbm erik ??? how about the black meli ss valves i use a lot of the PBM SS valves seam to work good :D enquiring minds want to know :3dSMILE: :3dSMILE:

If I run any mech. roller cam I run the PBM comp. series valves.
05-24-2007, 07:04 PM
pat mccarthy

Quote:

Originally Posted by erik erikson

If I run any mech. roller cam I run the PBM comp. series valves.

yes i use them to .nice valve for the price
05-25-2007, 10:37 PM
gassersrule_196

well apparently when my dad had the motor rebuilt last time <5 years ago> the heads were suppose to be alls tainless valves and 1.94 1.6 they guy tore em down and they were el cheapo stainless intake 1 piece with 2 piece OEM 1.5 exhaust valves and a shitty port job <i could tell that much. now they are 2.02 1.6 hes blending the bowls port matching the intake. and milling the heads a little. so it should be a very noticable differnence also going with 10*degee locks n retainers and most likely K-motion springs those springs were pretty wore out at 1.8 something installed height they had like 100 closed and 200 open whoa those were wasted!