-
10-06-2006 12:07 PM #1
Spark plug heat shields - some info for those using cast exhaust manifolds
Edit: This was a question looking for these, but I found them before anyone replied. I'm leaving the info here so that others can see what I found in case you need them too.
I found the little heat shields at corvette central (1958 - 1969 Corvette heat shields with clips)
http://www.parts123.com/parts123/yb....P49.95~~~~~~~FLast edited by pnut; 10-06-2006 at 12:21 PM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project