Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Worn Distributor Gear
          
   
   

Results 1 to 14 of 14

Threaded View

  1. 08-31-2006 10:12 PM #11
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    dist down to far or up in the block a hv oil pump . not the right gear for cam iron.stock cam s . iron melonited gm steel roller cam .and bronze gears steel rollers cams. bad block from gm .timing gear set holding cam out of the block .cam gear not in the right spot .did look at the gear that is normal wear but could go down a bit more but would not help much
    Last edited by pat mccarthy; 08-31-2006 at 10:37 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink