Thread: Valves Tapping
Results 1 to 11 of 11
Threaded View
-
07-06-2006 08:11 PM #1
Valves Tapping
I know the answer is somewhere in the threads , but im no good at finding things in the search area, so heres the problem, i have a bad tapping coming from 2 or more rockers , ive tried to halve ass adjust them but oil gets every where,tonight i took each rocker off 1 by 1 to visually inspect them,even though i really dont know a bad from a good one , but they did not look too worn, and the pushrods were not bent, i did find some thing that disturbedme though, 1 of the valves rattled a slight bit when i pushed it from side to side , im no expert but this does not seem right,but im not getting oil by the guides,i guess my question for yall is how do i know what component is bad? , how do i tell if a lifter is sticking or not? and does any body have any secrets on how to adjust valves without getting oil every where? i tried the clips ,did not work to well,oh the engine is stock 350, flat top pistons, 202 , 64cc heads, no fancy rollers or nothing ,just stock stuff,any tips would help tremendously, thanks
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40