Printable View
ok i need a horsepower guesstimate i know it wont be accurate and im going to have a bunch of hate mail but people have been bugging me about this,
its a 350 standard bore and stroke
10.7:1 CR
ported 193 heads
.488/.488 292/292 cam
stock chevy 4 barrel intake manifold
holley 600-650 cfm (idk which one yet)
summit headers
if im missing some important part tell me please lol
thanks guys
step down one on that cam for more bottom end, and I'd guess HP to be around 335....but that's just a guess.
Do use a smaller cam. If you're going to use a small carb and a stock intake, I suggest nothing more than 262 degrees of duration at .005". You're motor will make the same horsepower as the engine with the larger cam, but will also make much more torque.
ok got it smaller cam. thanks guys
what do you think a 3500 pound camaro with a stock th350 and say 3.73 gears will run in the 1/4 mile?
and would 3.73 gears be good or should i go to a lower gear?
with the original combo, 353 HP @ 6,000, 368 Ft/lbs @ 4,000
wow how did you figure that out?
oh, in perfect conditions, your car could do a 13.1 in the 1/4 mile
damn looks like i got some more work to do i want to get in the 12s
Dyno 2000, Dyno HP estimate software.Quote:
Originally posted by muteboy49
wow how did you figure that out?
thats awesome
yeah- they are sweet, us old fella's got to do it the hard way & just guess.
20 horse off ain't bad, I couldn't have guessed that close. Dyno 2000 has flaws, some variables are basic, and it dosn't calculate inline engines very accurate at all ( has to do with the single runner ) which is where I need my calculations to be correct, it says within 7% accuracy, I'd like to find a person with a dyno'd engine and get the specs so I can varrify it's accuracy:)Quote:
Originally posted by hambiskit
yeah- they are sweet, us old fella's got to do it the hard way & just guess.
Where is prattsville anyway Matt? I still got that extra grille, doors, hood, fenders, and all the 6-volt stuff you could want for your '51.
it's like 17 miles from Hunter MTN, Hunter NY, on Green county 23A ( in NY ). How much do you want for the grill and fenders?Quote:
Originally posted by hambiskit
Where is prattsville anyway Matt? I still got that extra grille, doors, hood, fenders, and all the 6-volt stuff you could want for your '51.
i will ask my buddies who race. im almost positive he got his BBC dynoed and ill get his specs....
what do you think a weiand intake manifold would add to that HP rating?
Are you looking for top end speed or bottom end torque?
a little of both i want to run high 12's
ok i believe you took my cam dimensions wrong lol the 292/292 duration was advertised it has 234/234 at .050 lift