Thread: electic fuel pumps
Results 1 to 15 of 16
LinkBack URL
About LinkBacksThreaded View
-
03-17-2006 05:27 PM #9
CHR Member
- Join Date
- Mar 2006
- Location
- Athens
- Car Year, Make, Model: 1989 chevy s10
- Posts
- 9
if its the one from the chrome isle at autozone,,,it'll only work for a 4cyl....no way will it have enough pressure to run "right" on a mustang,,,itll drive and idle good but if you get on it hard your carb will run out of gas...been there done that with a stock 350 chevy
AllenDrive it like you stole it!!!!
1989 s10
385 cuin,bowtie heads 2.05/1.65 valves,1.45 springs,ProComp 1.6 full roller rockers/stud girdle
kieth black pistons,m55hv oil pump
Engine Works 5.21/5.21 solid cam
cloyes tru roller timing chain set on +4,hooker hedders long tube,
victor jr.intake,AED 750 HP carb
Engine Works billiet HEI distributor 55,000 volt coil,3800 10" stall,350 turbo Tranny,4.56:1 gear posi,10 point rollcage,16 gal RCI fuel cell with sending unit,molded racing seats/5 point harness,B&M ratchet shifter,Auto meter tach and gauges,mickey thompson ET DRAG 28x10.5x15w
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!