Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Anyone ever polish their intakes?
          
   
   

Reply To Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 33
  1. #1
    Rugratman's Avatar
    Rugratman is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Annapolis
    Car Year, Make, Model: 67 Pontiac GTO
    Posts
    58

    Anyone ever polish their intakes?

     



    Was thinking of polishing my aluminum intake with the Eastwood kit.

    Has anyone ever done it themselves?

    Is it alot of work...? Say more then 8 hours?
    How did it look?
    Did the shine last?

    Or should I just send it out?

    Thanks, I would hate to open a big can of worms here....
    I am just learning as I go.

  2. #2
    pro70z28's Avatar
    pro70z28 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    CC
    Car Year, Make, Model: 70 Camaro Z-28 Now/40 Chevy Back Then
    Posts
    4,306

    Surprisingly easy actually. Mine is already polished, but I polished the rear houseing and a few other aluminum parts I made for the rear end. I split a 1/4" rod with a hack saw to hold a strip of emery cloth. Used it in a drill to get into the tight spots. Then used finer and finer sand paper. Then used rubbing compound and polishing compound to finish it off. I bought some of those inexpensive yellow gloves to do the final polishing. To me they work better than trying to hold onto a little piece of cloth while trying to get in tight spots. Worked for me.
    "PLAN" your life like you will live to 120.
    "LIVE" your life like you could die tomorrow.

    John 3:16
    >>>>>>

  3. #3
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Re: Anyone ever polish their intakes?

     



    Originally posted by Rugratman
    Was thinking of polishing my aluminum intake with the Eastwood kit.

    Has anyone ever done it themselves?

    Is it alot of work...? Say more then 8 hours?
    How did it look?
    Did the shine last?

    Or should I just send it out?

    Thanks, I would hate to open a big can of worms here....
    I did my heads, intake, alt. and water pump on my lt1, used the stuff from eastwood(I think I bought everything he had) spent about 400.00, took me 40 hrs. and it lasted about 6 mo. if I ever think about doing something like that again I hope someone, takes me outback and shoots me. I'm gonna get Pro 70 to do it.
    you asked! just a intake want be to bad.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  4. #4
    pro70z28's Avatar
    pro70z28 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    CC
    Car Year, Make, Model: 70 Camaro Z-28 Now/40 Chevy Back Then
    Posts
    4,306

    ahhhhh, I'd like to Mike but i've got this bad elbow. Reeealy been giving me problems lately.
    "PLAN" your life like you will live to 120.
    "LIVE" your life like you could die tomorrow.

    John 3:16
    >>>>>>

  5. #5
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Originally posted by pro70z28
    ahhhhh, I'd like to Mike but i've got this bad elbow. Reeealy been giving me problems lately.
    I hear you, it gave me a pain in the butt. everybody ought to try it one time.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  6. #6
    kitz's Avatar
    kitz is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    Austin
    Car Year, Make, Model: 32 Roadster, BBC
    Posts
    962

    It1S10 has it right.

    I did my BB Chevy intake and water pump. Each, especially the intake, has lots of tiny, hard to get to corners and angles etc. It kicked my butt. A rear end housing would be relatively easy.

    My polish job ain't exactly show quality either (see kitz in gallery). But it looks good from a few feet. In the end I got it as far as my patience would allow. At least 40 hrs in the both of them.

    Then I clear coated it with clear engine paint. That dulled it ever so slightly but I think it will hold up for a longer time.

    Next time I will buy my stuff already polished.

    Good Luck! Kitz
    Jon Kitzmiller, MSME, PhD EE, 32 Ford Hiboy Roadster, Cornhusker frame, Heidts IFS/IRS, 3.50 Posi, Lone Star body, Lone Star/Kitz internal frame, ZZ502/550, TH400

  7. #7
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    i've found a good look with aluminum parts is cleaning it up a little bit, spraying it a couple layers of bumper chrome, make sure to not let it fully dry each time you spray, then spray 2 layers of clear coat while still just a lil wet, and if you do it right, it comes out with a brushed aluminum look.... looks great on engine parts.... maybe i'll put up a few pics later to give you an idea...
    just because your car is faster, doesn't mean i cant outdrive you... give me a curvy mountain road and i'll beat you any day

  8. #8
    Swifster's Avatar
    Swifster is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    Sterling Heights
    Car Year, Make, Model: 1964 Studebaker Commander
    Posts
    440

    Or you can have it powdercoated (and Eastwood sells this stuff too). There are colors that match various shades of aluminum.

    I want to run a fine line between shiney and a stock 'look'. I don't want to polish the engine every 6 months (or less) if I don't have to, and I still want the engine to look great. I think my solution is powdercoat and chrome.
    ---Tom

    1964 Studebaker Commander
    1964 Studebaker Daytona

  9. #9
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i have did alot of aluminun stuff did a lot of the prep work on the gm concept showcar wheels. the flapper works good like PRO said i use this alot and it cheap i have use this way to polish the valleys in big blocks and head work to. look at enco sell alot of stuff to do it . mx wheels work great to
    Last edited by pat mccarthy; 01-30-2006 at 06:36 PM.

  10. #10
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Originally posted by Swifster
    Or you can have it powdercoated (and Eastwood sells this stuff too). There are colors that match various shades of aluminum.

    I want to run a fine line between shiney and a stock 'look'. I don't want to polish the engine every 6 months (or less) if I don't have to, and I still want the engine to look great. I think my solution is powdercoat and chrome.
    if i can't paint it , chrome it or powdercoat it, its not gonna get done.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  11. #11
    Swifster's Avatar
    Swifster is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    Sterling Heights
    Car Year, Make, Model: 1964 Studebaker Commander
    Posts
    440

    It definitely depends on the look you want. I always like a 'mechanical', machine type of look to an engine. Some like the engine to look like a piece of jewelry, and if that's what they like, more power to them. To me, it's a machine, and I want the engine and the rest of the driveline to reflect that. It doesn't mean I don't want it to look good. But to me solid chrome is boring. Texture and color add a lot to the engine compartment.
    ---Tom

    1964 Studebaker Commander
    1964 Studebaker Daytona

  12. #12
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    Originally posted by pro70z28
    ahhhhh, I'd like to Mike but i've got this bad elbow. Reeealy been giving me problems lately.
    rugratman, take heed. Gary got the bad elbow from polishing!
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  13. #13
    randywrench's Avatar
    randywrench is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    Hudson Wisconsin
    Car Year, Make, Model: 57 Buick Century
    Posts
    156

    I've polished a couple intakes and my TPI parts,LOTS of work!!
    I'll powdercoat next time!
    TEAMWORK is essential, it allows you to blame someone else!

  14. #14
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    Originally posted by techinspector1
    rugratman, take heed. Gary got the bad elbow from polishing!
    He's trying to have it both ways, pro is telling rugratman, no big deal, but he can't do no more polishing on the count of a bad elbow. I think he wants someone else to have a bad elbow. when you get ready to do this rugratman, I have a lot of this stuff left over, you can have cheap. the reason I don't have a bad elbow is I let the drills do the work.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  15. #15
    Rugratman's Avatar
    Rugratman is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Annapolis
    Car Year, Make, Model: 67 Pontiac GTO
    Posts
    58

    I never thought of powder coating the intake......Good idea.
    I have a Offenhauser intake, that I just got. To say they have a very basic finish is a understatement....It will flow great, but looks like it was sitting on a shelf for 30 years, even though it's brand new.
    I will look into the powder coating, I was going to spend a couple $$ on the eastwood kit anyway, I will put the money towards it.
    Glad I asked. I thought 8 hours was to much.
    I am just learning as I go.

Reply To Thread
Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink