Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: ouch
          
   
   

Results 1 to 9 of 9

Threaded View

  1. 01-02-2006 11:52 PM #4
    hambiskit
    hambiskit is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Shelton
    Posts
    693

    was it running when the "lots of water " happened?

    Pull your plugs & blow it out- water will not compress- take up the carb while the plugs are out & blow out the intake.

    Rebuild your carb.

    Buy new gaskets & an airfilter for the carb.

    check plug wires & dist. wires for burns, replace if needed.

    Buy new hose clamp.

    Get a Vaccum gauge- you'll need it for Eldebrock carbs. 22lbs on constant side- > 8 on the dist. side during step-up.
    Last edited by hambiskit; 01-03-2006 at 12:05 AM.
    Jim
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink