Originally posted by vara4
I'm not sure what to do, might have to make some thing special for them. Can't put any thing on the bottom valve cover bolts because the exhaust manifolds are in the way.


~ Vegas ~
So you can't get the valve cover off without removing the exhaust manifolds? I'm sorry, I'm need a better picture, but let me try. The ones I have bolt to the bottom bolts, but stick up about 2". I have headers and it lets me get a good angle and holds the wires well. I buy the longer wires, because I have room above but not below and need the length. I'm going tto take a picture now.