Thread: melted spark plug wires

Tweet

Buy a good set of wire looms and run them through that. I have had problems with the stock looms in that when they're that old they tend to break or only be about half there. I actually have a really cheap set I picked up at Checker/Shucks/Kragen that works kick ass. Before you buy a set though, try to get a look at a few different ones til you find some you like.

I'm not particularly impressed with the rail type looms anyway, they look great but I haven't had a set that worked as well as I figured it would. I'll try to get a pic of mine. I have headers so I don't have the problem you do, but I bet these would work in your application