Results 1 to 12 of 12
LinkBack URL
About LinkBacksThreaded View
-
03-28-2005 08:00 AM #11
CHR Member
- Join Date
- Dec 2003
- Location
- Pahrump
- Car Year, Make, Model: 1947 International Pick Up
- Posts
- 3,188
thesals; I'm trying to find a good steel rod right now for it,
and maybe a steel crank If I can find some one that makes them.
The oiling system is getting beefed up and I already have a stud
kit for the bottom end with a windage try, canton 8 qt pan,crank scraper, and a high volume oil pump. For the top end I already have Lunati roller rockers with screw in studs and guide plates, Pete Jackson gear drive, Weind Intake that has been matched to a set of two barrel cleveland heads that have been worked over to except chevy valves and dual springs.
On top of the intake I have a Berry Grant 750.
Oh and lets not forget the alluminum Ford valve covers.
~ Vegas ~Last edited by vara4; 03-28-2005 at 08:02 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This website will not be worth anything until if becones SECURE!
Not Secure