hi every body today i spent all day working on the camaro i did everything that everyone suggested. but guess what? i found it !after half the morning i decided to pull the valvecovers started the motor and watch the rockers move. they all were doing what there suppose to do except number eight.intake was barely moving exaust wasnt moving at all! i disassembled the top end and pulled the lifters number eights were dished i pulled the cam and ther was no lobes left on eight . im putting a new cam in know but i wanted to ask , does anybody have any idea why it did what it did? that cam has been in there since before last summer. did it take that long to were the lobes off if i had adjusted it to tight? or should i look for something else ? All the other lifters and lobes look like new.