Thread: I have no running oil pressure
Results 1 to 13 of 13
LinkBack URL
About LinkBacksThreaded View
-
02-14-2005 12:35 PM #1
CHR Member
- Join Date
- Feb 2005
- Location
- Daytona Beach
- Car Year, Make, Model: 1966 Chevy II SS
- Posts
- 5
I have no running oil pressure
I recently built a new motor for my chevy II. Its a 1973 block and I chaged it from a front sump pan to a rear sump with the new motor. That means that I had to put a new oil pump and pickup in it. I have oil pressure when i use a primer and an electric drill. But when i start it up there is no running oil pressure.
A couple of other things, I used the old oil pump driveshaft and everything else is new except the rods. Also I was sure that the oil pump driveshafts in SBC are all the same length. If anyone knows if the driveshaft for the pump in a 66 nova 327 is different cause the pump isn't the same.
Any ideas PLEASE!Last edited by cseay1; 02-14-2005 at 01:45 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Been getting the truck back together. Painted the wheels and got the tires mounted. Went with 235 55 17 all around. Too cheap.to chrome so I painted the bumper and hood emblem with some silver I had...
Stude M5 build