2010 Yenko 427 Camaro

Today we were working on the serial number 1 2010 Yenko 427 Camaro developing a tune resolving some driveability issues with the 427 engine. The car was equipped with a 427 engine, long tube headers, carbon fiber cold air kit, and auto matic trans--engine put down 425 rwhp locked in 4th gear after initial pulls in the mid 300 area. After a few pulls, a trip to BP for some fresh 93 octane, got it over 400 and then with some tweaking, 425hp.

Out on the street driving, the trans has some shift timing issues--going to take some pressure and timing adjustments to iron out these issues----this is the only automatic one so far and maybe the last, as 6 speed manuals don't have these issues or total amounts of driveline losses.

I'll keep everybody advised and post some pics when I can.

Jerry

Sounds very impressive, can't wait to see some pictures.

Thomas

68Chevelle

Guess I'm sort a like your sig but in a reverse way----couldn't build a Revell model of my car so I built another dragster----and they then made it too---my model building more or less fits the 1320inc 1/25 diecast---but Coyote does a good job

Yeah I only truely completed 2 models in my life. I have about twenty of them I need to build including a replica of my T I'm currently working on :LOL: I figured I might as well put my time and money in the real thing then the model can come later.

Quote:

---

Originally Posted by jerry clayton

68Chevelle

Guess I'm sort a like your sig but in a reverse way----couldn't build a Revell model of my car so I built another dragster----and they then made it too---my model building more or less fits the 1320inc 1/25 diecast---but Coyote does a good job

---

well about 33 years ago Jerry:D my buddy had a model of your car but some how the hemi ended up in a my 57 chevy along with the slicks :D. did alot of welding with a hot knife over Moms stove when she was at work:LOL: she had a lot of blue tip knifes. i did some of the die cast hubbly and gabriel kits .i move up to the arc welder :Dand Oxy torch:LOL:

I loved models as a kid, and got pretty involved. About 12 years ago, a friend and his son showed me some they were building. I decided to build one more.

About 8 years later, I decided I was spending too much time on this effort ...putting on an annual contest in Phoenix ...writing coverage for a magazine ...scratchbuilding prototypes for a small resin casting company ...and trying to raise the bar every time I built. I had just won a two year long national contest, and I decided I could never do better, so I quit. (...for now).

It is not easy to realize you are obsessive-compulsive later in life! :-)

On another note, I have a 2010 Camaro that will be coming in for paint graphics. (a full-sized one) We are talking about things that will ressemble the graphics or trim of a 1969 model, such as factory inspired Z-28, SS, or RS graphics, and such. I certainly hope your "Yenko" will be done with some traditional stripes. It seems a natural! :-)