Results 1 to 15 of 23
LinkBack URL
About LinkBacksThreaded View
-
12-07-2005 05:37 PM #23
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
every engines is diferent .msd goses in to this if the pistons are dome or flat top how are the head chambers and more on big block i like to start at 36 and 10 on crank and 26 in the dist =36 like to see it all in at 2500 rpm that is the starting point i spend some time on the tops of the pistons i get them smooth like a old bar of soap and get all the junk out of the chambers of the heads and make shure the head gaskets fire ring is got hanging in the bore and cut the deck to O or the pistons down a bit but not to much if the head gaskets are 0.040 run it at0.005 or soLast edited by pat mccarthy; 12-07-2005 at 05:41 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I’m also late to this party. RIP John Boy
John Norton aka johnboy