torque converter for race car

Printable View

04-21-2005, 02:18 PM
autocityman4

torque converter for race car

...............
04-21-2005, 02:24 PM
techinspector1

Any of the well-known converter manufacturers can handle your needs. Use your search engine to look for Hughes, Art Carr, ATI, B&M, etc.
04-22-2005, 05:27 PM
autocityman4

...................
05-04-2005, 09:00 AM
Phantasea427

PTC

Here's a great company.

http://www.ptcrace.com/

I and many of my friends on the BBF forum have excellent results. Highly recommended. Give 'em a call. They rebuilt my buddies 8" PG converter for about $250!
10-26-2005, 01:10 PM
DADNOVA

Converter

Allmost any converter will work with the small HP you are refering to.
The main things are what stall you want. Find out what degree at 50 your cam is and buy converter to match or its all a waist of time.
10-26-2005, 01:45 PM
pat mccarthy

had good luck with coan and they make some $ 450 up to $1000+ the one s we use are $1200 and can take over 750 torque in a 3800 car
10-26-2005, 01:56 PM
DADNOVA

If money is a problem. Redneck racing on E-Bay will build a converter to match your needs at a good price.
Just enter 4000 or higher stall and you should find them.
10-26-2005, 07:03 PM
Dipschnit

Also if your on a budget, Transmission Specialties makes a good converter, they have a 24-2800 for a Gm Trans. for 149.00 on their website or you can probably find one at your local speed shop for 199.00.
10-26-2005, 09:38 PM
blue57ford

For the kind of power you are making, a high performance daaco converter works just fine. We have used them many times in our shop. The last one we used was for a 700R4 and cost less than $130.
10-26-2005, 10:08 PM
pat mccarthy

so will a vega :whacked:

All times are GMT -7. The time now is 04:58 AM.