Thread: 32 Questions

Tweet

1-Body on top of the frame, no fenders. Body style doesn't matter. If the body is dropped over the frame it's channeled. (bonus answer)

2-If capitalized, that's the manufacturer, they're in Pennsylvania.

3-Pinching the frame usually means pulling the fronts of the frame rails closer together so they tuck under the grille shell instead of hanging out wider. Only works on hiboys unless you're crazy. Sometimes used to describe the modification necessary on Model A body/deuce frame combination for the area under the cowl where the A body is narrower than the '32 body.

4-So you don't get nose bleeds from the car sitting too high. The term "too low" is an oxymoron.

So where are the other 28 questions?

You might want to go to the forum page and scroll down to the Deuce Den and read some of the old threads. There's lots of info there too.