Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree944Likes

Thread: Another Build Thread - My '32
          
   
   

Reply To Thread
Page 20 of 36 FirstFirst ... 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 ... LastLast
Results 286 to 300 of 532
  1. #286
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Yes, Seth, there are several Volts here in my little town. My son has a 2012 and I had a 2013 until late October. I would still have it, but getting in and out of it was getting to be a challenge for my wife and me. The Volt is about the same size as a Chevy Cruze and it sits pretty low. My wife has serious back trouble and I have Arthritis in my left knee which makes getting up from a low position a problem for both of us sometimes, so we recently joined the movement to SUVs. We really liked driving the Volt. The acceleration was surprising and, when running only on the battery, it was absolutely silent. The best part was the infrequency of buying gas; the first year we had it we put gas in it 4 times (9.7 gallon tank) and drove it a little over 9,000 miles!
    Dave Severson likes this.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  2. #287
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    OK, one of the things I said I would do is bob the rear frame rails and recontour them to fit closer to the body. The original frame is built to hold the gas tank under the rear edge of the body. It is protected by a rear spreader bar and a bumper mounted on spring steel brackets. All that looks pretty good on a full-fendered car. The tank fills that ugly gap between the bottom of the body and the frame rails and a stock '32 bumper and brackets is pretty substantial. I see a lot of fenderless '32s with no rear bumper, but still using the stock gas tank. It fills that ugly space and looks OK, but to me, that is just asking to be burned to death in a rear end collision. Anyway, that's just my opinion and I'm not badmouthing anyone else's choices, but my fuel cell is going in the trunk just like the one in my '31 coupe. If someone hits me in the rear hard enough to get to that tank, I'll be dead from the impact before the tank explodes...

    So, the tank is going in the trunk - what to do with those ugly frame rails hanging out there beyond the rear of the body? A lot of builders just lop them off somewhere under the body. That certainly helps the appearance, but I have this pretty brand new Bob Drake chrome spreader bar... Actually, I like the idea of having the spreader bar and frame rails under the back of the body in case some distracted asswipe, playing with his/her phone, bumps me at a stoplight, etc. (It's happened before.) It could save the fiberglass body from severe damage and at least keep it minimal enough to repair reasonably.

    First some measurements are necessary. The top of the frame rails are 3 7/8 inches below the body and they stick out 8 inches. The trunk floor is sitting on the frame rails 17 inches from the end. I have to do the cutting and reshaping behind this point, so I put a mark on the frame rails with a Sharpie (not shown). Next I measure from the frame rails, at the back edge of the body, to the floor and write that measurement down. With all the measurements taken, I hoist the rear of the body up off the frame and just for safety, I put some 4 x 4 blocks on the frame under the trunk floor near the rear axle. If my straps slip I won't get my hands or fingers crushed.
    Attached Images
    NTFDAY, 39Deluxe, Hotrod46 and 2 others like this.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  3. #288
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Using a combination square, I mark the frame rails 17 inches from the end (not shown) and cut them off with my 4 1/2 inch grinder with cut-off wheel.

    Next, on a piece of cardboard, I trace around one of the cut off pieces of frame. I use a straight edge (ruler) to extend the outline forward slightly and also extend the cut line. Measuring on my cardboard image, I find 8 inches from the cut end of the frame rail (toward the right in the picture) and make a mark (It says 8 1/2 on the cardboard, but I changed it after I wrote it on there). Using a small square I make a vertical line up from this point. 3 3/4 inches above that point on the cardboard I make another horizontal line parallel with the outline of the frame rail.

    Now I place the frame rail piece on the carboard with the tip end aligned to the new height and length location and the cut end aligned to the old cut location on the cardboard (see pic). I transfer the marks from the cut line on the cardboard to the frame rail, roll it over and use a straight edge to complete the line where I will trim it off at its new length and angle. I cut one frame piece and use it to mark the second one, then cut the second piece.
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  4. #289
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    To finish this modification, I bolted the frame pieces to the spreader bar, propped the whole assembly in position, and used some Visegrip claw clamps to hold it. I took that height dimension that I wrote down earlier, added 3 3/4 inches, and measured from the floor up to the relocated frame tips. Once everything measured correctly, I welded the frame tips in place. Finally, I let the body back down on the frame and removed the straps.

    The spreader bar now fits up nicely under the rear edge of the body and isn't hanging out in the atmosphere with no purpose. When the welds are ground smooth and everything is painted, this modification will almost disappear..
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  5. #290
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,264
    Blog Entries
    1

    Nice work. That will look very nice and a lot of people will not even notice it I'd guess.
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

  6. #291
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,496

    That looks good. Can't argue with not wanting to burn up!
    Mike

    I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
    I'm following my pass​ion

  7. #292
    rumrumm's Avatar
    rumrumm is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Macomb
    Car Year, Make, Model: '32 Ford 3W Coupe, 383 sbc
    Posts
    1,593

    I don't have a good photo, but I did something similar with my frame. But I chose to curve the frame up and hide the crossbar behind the rear of the body. I figured if I ever got a mild hit, it would prevent it from caving way into the trunk. The fiberglass could always be reconstructed by a shop or a replacement panel could be ordered from Outlaw who manufactured the body.


    Lynn
    '32 3W

    There's no 12 step program for stupid!

    http://photo.net/photos/Lynn%20Johanson

  8. #293
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    When I lift the body off to do all the finish welding, I plan to weld in another crossmember of 1 1/2 x 1 1/2 square tubing right behind this one so it's not visible from the rear. I will mount my license plate bracket and tailpipe hangers from it similar to what you did. I really like the looks of your tailpipe hangers; did you fabricate those or were they commercially made?
    stovens likes this.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  9. #294
    rumrumm's Avatar
    rumrumm is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Macomb
    Car Year, Make, Model: '32 Ford 3W Coupe, 383 sbc
    Posts
    1,593

    I had to fabricate the aluminum ones connected to the exhaust pipe. There is a manufacturer that makes them but not for 3 inch exhaust pipes, so I made a pair from 1/4 inch aluminum plate. My license plate bracket and the exhaust hangers that are welded to the hidden crossbar are pieces that I fabricated out of 1/8 inch steel.
    Attached Images
    Last edited by rumrumm; 12-19-2018 at 06:28 AM.
    39Deluxe and 40FordDeluxe like this.


    Lynn
    '32 3W

    There's no 12 step program for stupid!

    http://photo.net/photos/Lynn%20Johanson

  10. #295
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    Somehow I thought you were building a roadster. Love the 3w. Also am interested in your treatment of the bobbed frame with spreader bar tucked in. Thanks for sharing this build.

  11. #296
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    Wow I sure hope you can use the electric power steering. I have been wondering about that.

  12. #297
    39Deluxe's Avatar
    39Deluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Edgerton
    Car Year, Make, Model: 59 Corvette 283/270 69 C10 Stepside 355
    Posts
    161

    Like the bobbed frame rail treatment. That spreader bar tucked up tight is a nice look.

    I have/had 2 Equinoxes and one Terrain and have a total of more than 520,000 total miles on those electric power steering units with zero problems. They are bulky but would be a great swap.

    Tom
    Last edited by 39Deluxe; 12-20-2018 at 10:16 AM.

  13. #298
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Figure8 commented he thought I was building a roadster... When I started this project I fully intended to build a roadster, but I later changed direction. I went back and read the entire thread to this point; I owe you all an apology for not being clear on the subject. When did I change my mind and why?

    My original plan was to build a roadster to replace the Track-T I had up for sale. I was enjoying the open car, but my wife couldn't get in and out without help because of her back. I was going to build another roadster that had doors - a '32 Highboy. Meanwhile, I was still driving the Track-T whenever I was going someplace without her. In 2017, after I was already building my '32 chassis, I kept getting rained on. From late May until mid-November, every time I got the roadster out I got wet! I didn't even have to leave the house. I could set it in the front yard with a FOR SALE sign when there was not a cloud in the sky and 20 minutes later it would be pouring rain! After that I decided if I wanted to drive my '32 it was going to have to be a coupe. Yes, I could put a top on a roadster, but side curtains are a pain in the butt to deal with. A cabriolet would be the answer - a folding top with roll-up windows. That would be fine if I had $14,000 to blow on a body. I don't. A 3-window has a top and windows so I can drive it year-round regardless of weather and the body costs under $8,000. I made the decision to go with the 3-window last year after getting wet about the tenth time. For some reason I never said anything about it on here.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  14. #299
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    The pic below is of my new steel grille shell and stainless grille insert. I have two fiberglass shells - one from Westcott's which is nice (it's the orange one in previous pics) and a second one that came with my body which is a POS (badly warped on one side). I almost bought a new stainless insert at the Turkey Run last month for $195, but for some reason I walked away from it. Anyway, I was poking around on Ebay after that and I found this steel shell with insert for $192 and free shipping. It had some mixed reviews from other purchasers, but I figured if I could use the insert in my good fiberglass shell I was money ahead and, if the steel shell was bad, I could use it to make a conversation piece for my shop wall...

    When it arrived I was pleasantly surprised by the appearance. The shell was beautiful at first look and so was the insert. Problem was they didn't fit together! The first problem was the outer rim of the insert was slightly flared outward all around the back edge. I held the insert face down on a flat table and used a flat-faced hammer to "persuade" it inward slightly, all the way around the perimeter. It was much closer to fitting then, but still a bit too tall. Using a body spoon and a 20 ounce ball-peen hammer, I hammered the inside flange of the top and bottom of the shell (areas between the arrows in the pic) to lengthen the opening just a little. The insert still fits very snugly, but it goes in now. I will probably do a little more hammer and dolly (or spoon) work before I finish, but I now have a nice steel shell and stainless insert.
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  15. #300
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,264
    Blog Entries
    1

    Nice fix and that's a pretty good deal at that price from what I remember.
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

Reply To Thread
Page 20 of 36 FirstFirst ... 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink