Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree944Likes

Thread: Another Build Thread - My '32
          
   
   

Reply To Thread
Page 7 of 36 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 ... LastLast
Results 91 to 105 of 532
  1. #91
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    I'm anxious to see how you do your steering. Looks like things could be a little tight. I know you have it figured out since you have done it all before. Thank you for a great tech thread

  2. #92
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Thanks, Figure8. It's my pleasure. Writing this thread kind of helps keep me on task.

    Actually, I do have an idea what I want to do, but I kind of work out the specifics as I go. Yes, the torsion bars do present a couple of challenges to the placement of some components, but I think the ride quality makes it worthwhile. On my coupe I used the steering box from a late '70s Toyota 4WD pickup (some early coupe build pics below). It has a long sector shaft so the body of the gearbox is mounted just above the torsion bar, but the Pittman arm is below it. Those are a bit scarce now days, but I have a steering box from a 1980 Corvette that is almost dimensionally identical to that Toyota, so it's a possibility. The other possibility is a Unisteer style rack and pinion. I can't positively determine which is more practical until I have the engine mounted. Then I will use whichever fits best. I'm using a big block this time, so it may be different than my coupe. Stay tuned...
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  3. #93
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    The next items on my part fabrication list are the steering arms. Remember, I'm using Speedway Motors spindles and 4 inch dropped forged axle. Speedway has steering arms, but... One set says "not for use with dropped axles". The other ones are flame cut from 1/2 inch steel, but they look like they are only dropped about 3/4 inch. So, I'll need to fabricate some arms that will drop below the frame and torsion bars (I want this thing "in the weeds"!).

    I happened to have a piece of 2 1/2 x 3 angle iron with 5/16 wall thickness. That should be plenty hefty enough. To begin I took some measurements on my Speedway spindles. I needed to know the hole spread and how much clearance would be needed to get around the kingpin boss. With the dimensions in hand, I was able to make a poster board pattern. I also made an additional piece (add on) for the right side so I could put a second hole in it for the cross-steer drag link. If it turns out that I don't need the second hole, I can cut it off later. Using the pattern, I marked and drilled the holes and then marked the pieces for cutting with my oxy-acetylene torch.
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  4. #94
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    The next step, of course, is fire up the torch and cut the steering arms out. They really look ugly at this point, but we all know what's next - grinding.., and grinding.., and grinding. Once they were starting to look fairly decent it was time for trial fitting. I found a few little places where I had to relieve some interference for final fitment. Once everything was fitting properly I gave the arms a coat of primer to inhibit rust and also so they would show up better in the pictures.

    Last thing I did was make a temporary tie rod so I can confirm clearances, etc. This tie rod is temporary because later I will weld bungs on the holes and ream them with a tapered reamer so I can use conventional Ford style tie rod ends and a slightly larger diameter tie rod.
    Attached Images
    Whiplash23T likes this.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  5. #95
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,606

    Thanks so much Jim.
    Following along has been informative and fun.
    Torsion bar suspension isn't the norm for a hot rod, so kudos to thinking outside the box.

  6. #96
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Since your talking about steering boxes----------on some race cars( Prostockers) I have used the flex haft from I believe a Pinto instead of U-Joints, and also I might add I believe some were also used on some BMWs?-takes up a lot less space around exhaust, oil dry sump pumps, etc
    Driver50x likes this.

  7. #97
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Thanks for the tip, Jerry. I had forgotten about those flexible shafts and that's a good idea. Pintos are as scarce as clams peckers around here (they all got used up in the Ministock wars at the local race tracks), but BMWs are plentiful in the local salvage yards. I'll look for them.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  8. #98
    Driver50x's Avatar
    Driver50x is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2016
    Location
    Saint Petersburg, Florida
    Posts
    430

    Any progress on the 32 lately Jim?

  9. #99
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Unfortunately, no progress to report. I got temporarily sidetracked helping my son with his project.

    Just before Christmas he traded his '31 Model-A sedan for a '50 Mercury. It's an old survivor custom with a 3" chopped top, shaved door handles, frenched headlights, etc. During its lifetime someone (probably multiple different owners) spliced wires, cut stuff out, spliced some more until the wiring was crap and nothing worked but the headlights and one taillight. There was evidence of an under-dash fire at some point in its history (melted wires). So far we have installed a new steering column, completely rewired it, installed all new gauges, replaced the fuel sender, changed the alternator, and given it a "temporary" satin black paint job. We still need to go through the carb to get it running right and then it will be roadworthy. The good news is it has a nice green & white Naugahyde interior and a fresh 350 Chevy engine & trans. Hopefully we'll finish his repairs next week and then I'll be back on the Deuce.

    My next step will be installing the rear suspension. I am still trying to decide if I want to use a 4-bar setup or a "truck arm" system like my coupe has. I have all the components for both...
    stovens and 40FordDeluxe like this.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  10. #100
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    will you be using torsion bars in the back?

  11. #101
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    I haven't decided yet. I have another set of the Nissan pickup bars that I could use. On the other hand, it would be much easier to use coil-overs. If I use the torsion bars I will likely mount them crossways on a fabricated crossmember above and behind the rear axle. My coupe has '82 Chevette springs in the rear and it rides comfortably, so conventional coils is another option. There are advantages and disadvantages to each system, so I simply haven't decided yet...
    34_40 likes this.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  12. #102
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    Quote Originally Posted by J. Robinson View Post
    I haven't decided yet. I have another set of the Nissan pickup bars that I could use. On the other hand, it would be much easier to use coil-overs. If I use the torsion bars I will likely mount them crossways on a fabricated crossmember above and behind the rear axle. My coupe has '82 Chevette springs in the rear and it rides comfortably, so conventional coils is another option. There are advantages and disadvantages to each system, so I simply haven't decided yet...
    The truck arms (ladder bars) would have more symmetry with the hairpins in front. If you decide not to use the torsion bars I would vote for coil overs. Don't see any advantage to separate coil springs. JMO.
    By the way I read the thread on your T and the fact that you are a professional teacher really shows. Your students are lucky.

  13. #103
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,264
    Blog Entries
    1

    Your son's new ride sounds pretty cool. It seems the wiring is the first thing hacked and rarely repaired correctly. That's been my luck any how.
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

  14. #104
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Figure8 - The truck arms on my coupe are not readily visible unless you get down on your belly, so they would be a non-issue visually. I make them from 2 x 3 tubing and similar to the ones used in NASCAR. The big advantage to them is they provide good bite when "launching" plus they are really strong. The 4-bar system would provide just as nice ride and only the bottom bar would be visible on each side, which is common on fenderless Deuce roadsters and coupes. I have done both multiple times in the past, so I think it comes down to nothing but preference. I'll make a decision soon...

    40FordDeluxe - Here's a snapshot of the Merc right after we finished the temporary paint job. We did the satin black so we can easily spot it in as we do the bodywork on it. It has some cracked welds around the rear side windows, some holes to fill where the dummy spots used to be, the front fenders are sagging a bit which makes hood fitment impossible, and there are a few dings in it that we'll straighten. Right now my son's plan is to paint it dark purple metallic with green and white flames and scallops. Of course that could change by the time we get that far.
    Attached Images
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

  15. #105
    J. Robinson's Avatar
    J. Robinson is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Titusville, FL
    Car Year, Make, Model: 31 Ford Coupe; 32 Ford 3-window
    Posts
    1,782

    Figure8 - I meant to ask; where does your screen name come from? Are you a current or former figure-8 racer? If so, where?

    As for me, I retired in May of 2010, but I did spend many years in the classroom. I taught auto mechanics, auto body repair, woodworking, drafting (old style with a pencil, compass, triangles and T-square), hydraulics, beginning welding, and even American Government one year. I also worked side jobs along the way as a fabricator/welder, carpenter (frame and trim), and machinist. Anyway, I'm a sort of "Jack of all trades", but my main gig was teaching and I still like to pass along what I can to whoever can use it.
    Last edited by J. Robinson; 03-22-2017 at 07:20 PM.
    Jim

    Racing! - Because football, basketball, baseball, and golf require only ONE BALL!

Reply To Thread
Page 7 of 36 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink