Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree1Likes

Thread: Gas Tank
          
   
   

Reply To Thread
Results 1 to 15 of 20

Hybrid View

  1. #1
    pepi's Avatar
    pepi is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Dec 2006
    Location
    Woodstock
    Car Year, Make, Model: 34,stroker,32pu,2020 MustangGTpp2
    Posts
    1,109

    Sounds like crud, can you disconnect the fuel line from the tank blow air back thru just the line . Reconnect to tank see if the flow speeds up not a fix but that might define the problem. Cannot see, think of a way just the fuel line would be the bad actor, unless it is rubber and is collapsing inside.

    Full tank not fun, reading that tank link I see this.
    • Ball check vent furnished with tanks requiring non vented caps

    Might be something to find and check, however "removed cap and not a very strong stream," still think it will be crud.
    I have two brains, one is lost and the other is out looking for it

  2. #2
    mike.t's Avatar
    mike.t is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2014
    Location
    Winnetka
    Car Year, Make, Model: 32 ford sedan
    Posts
    30

    Quote Originally Posted by pepi View Post
    Sounds like crud, can you disconnect the fuel line from the tank blow air back thru just the line . Reconnect to tank see if the flow speeds up not a fix but that might define the problem. Cannot see, think of a way just the fuel line would be the bad actor, unless it is rubber and is collapsing inside.

    Full tank not fun, reading that tank link I see this.
    • Ball check vent furnished with tanks requiring non vented caps

    Might be something to find and check, however "removed cap and not a very strong stream," still think it will be crud.
    Disconnected the line and blew in to it. At first not able to blow hard enough to do anything. After a bit it started blow air back toward the tank and had better flow.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink