Thanks again guys. Well I went back at it today in that brutal heat, but the steering system is done! I just have some final welding on my heim joint bracket when I have everything down to the frame. I welded it from the bottom, so it's good for now. It steers real easy, and it's so smooth. Here's some more pics. I didn't have all the set screws in, but I will mark where I need to dimple the DD shaft, for the u-joint set screws, and uni-steer u-joint bolt. I welded in a bracket on the engine mount/side rail, for the heim joint. There's a locknut on the underside, and I'll have a lockwasher in there too. I'm so glad this part of the build is done.