Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: This could be a tough one . . . .
          
   
   

Reply To Thread
Results 1 to 4 of 4

Hybrid View

  1. 02-25-2004 07:15 AM #1
    rocknrod's Avatar
    rocknrod
    rocknrod is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    Waco
    Car Year, Make, Model: 1932 Ford, 5 window coupe, highboy
    Posts
    283

    This could be a tough one . . . .

     



    I'm looking for any company out there who sells the rear axle retaining bolts, the T type bolts that go on the end of the nine inch Ford rear end. The four on each side that hold on the brake bracking plate.

    What I am looking for is a STAINLESS set so I can polish them.

    Any one know of any leads ?
    Thanks
    Reply With Quote Reply With Quote
  2. 02-26-2004 09:42 PM #2
    SirSpeedy's Avatar
    SirSpeedy
    SirSpeedy is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jun 2002
    Location
    Daytona Beach
    Car Year, Make, Model: Deuce Roadster ; Deuce Tudor
    Posts
    166

    I would say you'll have to make them. Get 1/2" bolts, cut off the heads and weld short lengths of SS 1/4" rod across them.

    If you going to polish them, aren't you concerned about chipping the pain around them? those T bolts hit the axle tubes when you tighten them, that is the point of the "T" in T bolt. The wings swing over and hit something to keep them from turning.

    We generally just use SS hex bolts and hold them with a wrench when tightening the backing plates.
    Reply With Quote Reply With Quote
  3. 02-27-2004 06:16 AM #3
    rocknrod's Avatar
    rocknrod
    rocknrod is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    Waco
    Car Year, Make, Model: 1932 Ford, 5 window coupe, highboy
    Posts
    283

    No Paint, Chrome !, Even the brake backing plates
    Okay thanks for the info though.
    Reply With Quote Reply With Quote
  4. 02-27-2004 07:18 AM #4
    animalracer's Avatar
    animalracer
    animalracer is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Hooper
    Car Year, Make, Model: '56 Plymouth Belvedere
    Posts
    78

    Check this site out; they have lots of stuff for 9" Ford rears, including newT-bolts for a buck apiece. http://www.peytonperformance.com/sto...=HOME:RearEnds

    I can't find any SS ones, but you might look at chrome or silver powder coat on a new set of raw steel ones....
    Last edited by animalracer; 02-27-2004 at 07:48 AM.
    No, if you were me, you'd do it just like I did.
    Animal
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink