Printable View
Recently traded into this 3w, but was unable to get an identity on the body manufacturer. Nicely done, straight, lots of steel and wood inner structure. The one feature that seems unique (to me) is the lack of a reveal over the windshield. It is over the doors unlike the outlaw version. If anyone can help identifying who built it, i'd appreciate it. In the meantime i'll just continue to de-billetize it.
Thanks, steve heller
Maybe Down's. Their 3 window didn't have the revel over the windshield.
I'd agree with Dan, one's I've seen that were claimed to be Downs had that same kinda "flat", squared off look about them.
It is a Downs ...
Look at the rear window. Shaped NOTHING like my original Henry 32 3W ( shown below ). Even allowing for the chop ... the window is out of whack for a Ford. The reason is ... Downs used a 33/34 Chevrolet rear window. Downs made a good many 33/34 Chevrolet glass bodies before ever trying to do the 32 Ford 3W. They took the easy route and used a window shape they already had.
http://hotrodders.com/journal_photos...2307565301.jpg
That little mistake ( IMHO ) aside ...
Downs did made a pretty nice body ... and most of the ones I have seen are holding up good. :D
I was not aware that Downs copied Outlaw's body modifications. Hmm? You can always tell an Outlaw body as they have 1/2 inch more chop than all the other ones.
Nope, it's NOT a Downs. I have a Downs and my windshield looks nothing like the one pictured above. I have the reveal over the windshield..
I'm confused about the rear window comment. Mine looks very similar in shape to the other manufacturers windows which are chopped.
Regardless of who made it, it looks good!!
Ron..
I think you have an Outlaw body. It looks like mine.
Thanks guys, now i think my heads going to explode. Really do appreciate the input. I'll have to start paying more attention to bodies when i'm out and about.
Well, it doesn't really matter ... does it ??? :D :)
The coupe looks good ( to me ) and it must drive and run out good ( because you did buy it ). The manufacturer is really of little to no consequece. :toocool:
Well said!!
Well heck, Let`s all be confused .I have a Down`s `32 3W (picked it up personally in Lawton) and it does not have a reveal above the windshield.Quote:
Originally Posted by DeuceRon
Looks a nice car to me :)
Measure the height of the side window and let us know the number. As I mentioned, Outlaw has more of a chop than other manufacturers.
Measure the height of the side window and let us know the number. As I mentioned, Outlaw has more of a chop than other manufacturers. We should be able to determine this by process of elimination.
hi! this roof is the possible sort of europeen buit(england) ex:jago near1980 sorry my english is verry bad!!!!!!!!!!
Side window measures approx. 8 1/4".
Mine also measure 8 1/4, so you have an Outlaw body. It is one of the best fiberglass '32 3W bodies available.
Hmm. Well, that puts a spin on things. Guess I'd better do some more homework then. They all look so similar that it's hard to tell the difference. One thing is for certain, my side window measures about 9 inches, so I don't have an Outlaw.Quote:
Originally Posted by bannedleader
I give up..
Can you post some pics of your Downs so that I can see the differences?
thanks
Ron..