Printable View
I can't find my parts list-
32 roadster, Walker radiator set up for SBC, ZZ430 motor.
Someone have part numbers for the upper & lower preform hoses? Bottom one needs to have a internal spring to prevent collapse.
My lower one is looking a bit portly.:LOL:
Appreciate any help.
On my 32 3W and the 32 roadster ( both with ZZ430 engines :D ) I use a Gates #20225 on the lower and a Gates # 20046 on the upper.
http://img.photobucket.com/albums/v1...r/DSC01917.jpg
On the #20025 ... I have to shorten it up some and the end theat goes into the Walker Radiator has a reducer sleeve ( available from Gates ) . I do not have its number but any decent parts counter man most likely has it.
On the #20046 ... my thermostat housing goes straight up ...
http://hotrodders.com/journal_photos...1913596511.jpg
It is a Everco #W-24931 but a 1985 Chevy van with a 305 will work also.
http://img.photobucket.com/albums/v1...r/4306c900.jpg
I have a screw in temperature gauge in the fitting on the thermostat housing since this photo :whacked:
Thanks for the numbers buddy. Helps alot. Your bottom hose looks exactly like mine. My top one is close but my water neck is angled (and swivels).
I have a straight one around here somewhere.
Forgot about this thread- guess I should update.
So-Cal Speed Shop sells a Gates hose for the bottom. I got the number & bought it else where.
Bottom hose is the same Gates #20242 but comes with no internal spring. I robbed a spring from another hose I had laying around.
The bottom hose needs a 1 3/4 x 1 1/2 bushing at the water pump. Part is Gates #26391
Fits perfect w/ a little trim.
Upper hose, So-Cal sells the upper also but for a straight water neck. That number is a Gates #20380 but I decided to use my angled water neck because of my MoonEyes oval air cleaner. The straight one wouldn't clear- plus I have a passenger side inboard alternator to route around too.
Angled swivel base neck & a Gates #20607 w/ a bunch of trimming to fit. Perfect fit.
Hope this info helps someone else someday.
And it did. Thanks.Quote:
Originally Posted by Steves32
I used lower hose for 1956 chevy v8. worked perfect, no cutting, after spending hours trying to figure something out for it. got the idea from this board.
Product Catalog Pete