I will have to go with SirSpeedy on this one, I'm not looking for a radical rake, but a more traditional look. I am looking at using a posies reversed eye spring (2-1/2" drop) for the stock 37 rear axle. This will put the top of my axle housing about 5-1/2" below the bottom of the "c" notch. The dropped front axle will use a reverse eye as well. Tires will be 6.50's or 7's on stock 36-39 4.00x 16" artillery wheels or '41 steel wheels(I haven't made up my mind) but I really like the look of the Artillery wheel with a 37 hub cap and trim ring.
All that said, I worked on it some yesterday and I modified the A crossmember slightly and got it to sit right at 7 degrees with the frame level to the ground. I also spent another 3-4 hours on the rear crossmember which is almost done except for cleaning up a few welds.