Quote Originally Posted by new 32 roadster
I would not buy a So-Cal frame again. Mine was too narrow in the back for a stock tank or spreader bar.
It is a fairly well known FACT that most reproduction 1932 Ford frames are purposely built a little more narrow than what Henry Ford did. The reproduction fiberglass bodies are thicker in the rocker area and have trouble getting on a dead on original frame. TCI frames have the same issue. It is way easier to make a chassis a little more narrow ( user friendly ) than dead on.

That's why I have a copy of the original Ford 32 Frame blueprint ... and ... always use a original set of rails in a frame jig.